Randall Amplifiers Home.
Randall Products Randall Artists Locate a Randall Dealer. About Randall. Randall Accessories.
Randall Accessories Store Now Open.
 

Heads  | Kirk Hammett Signature | George Lynch Signature  |  Modules  |  Signature Modules  |  Combos  |  Rack Gear

 
 
  RM100C
Randall RM100C Combo Guitar Amplifier
++ Click to Zoom ++

RM100CBP
Randall RM100CBP Combo Guitar Amplifier
++ Click to Zoom ++

Guitar World Platinum Award.A half-stack's nightmare! Designed for ultimate flexibility, this revolutionary fully loaded 100 watt modular tube combo provides easy mobility without sacrificing the punchy tone of a closed back cabinet. Because it’s an MTS series amp and can be loaded with any number of tube preamps, we had to design a cabinet that would work well for both rock and metal, as well as spankin' country and blues.

To do this we designed the amp with a dual back option. The amp comes from the factory basically sealed giving you the punch and tightness of a closed 2 x 12, but it also includes a 1/3 removable top panel to achieve the looser, more boomy low end found in traditional semi-open back combos.

Don’t get us wrong, this seriously powerful combo was designed to rock, but it will definitely dish out serious tone across each genre of music.

Features:

  • 3 module
  • 2 x 12" design with 2 16 Ohm Celestion G12T-75s
  • 100 watts
  • New for 2006 - 6L6 power tubes
  • Master volume
  • Master density & presence
  • MIDI in/thru
  • Tube buffered parallel effects loops with front panel mix control
  • Series effects loop
  • Rear panel bias test points
  • Slave output
  • Includes 3 button MIDI foot controller
  • World voltage AC input selector (100/120/220/240)

RM100C1
Same as RM100C loaded with Clean, Treadplate, & Ultra Preamps
RM100C2
Same as RM100C loaded with Blackface, Plexi, & XTC Preamps
RM100CP2
Same as RM100C2 with Palomino Vinyl & Grill Cloth
RM100CBP2
Same as RM100C2 with Black Vinyl & Palomino Grill Cloth

Read the review from Vintage Guitar Magazine

  
Bar
  RM50CP
Randall RM50CP Combo Amplifier
++ Click to Zoom ++

RM50CBP
Randall RM50CBP Combo Amplifier
++ Click to Zoom ++

 A Workingman's Dream! The revolutionary RM50B modular combo provides the flexibility to have any combination of classic to modern tones, simply by plugging in your choice of preamp modules.

Perfect for the weekend warrior, club professional, or studio pro who is looking for an all tube amplifier with multiple tones. It's now possible to build your own personal custom rig with say, a classic Fender® tone, and a hot rodded Marshall® tone in one amp. We'll let you choose the tones with the new RM50B Modular combo.

  • 2 module
  • 1 x 12" design with 16 Ohm Celestion G12T-75
  • 50 watts 6L6 tube
  • Master volume
  • Master density & presence
  • Spring reverb
  • Tube buffered parallel effects loops with front panel mix control
  • Series effects loop
  • Rear panel bias test points
  • World voltage AC input selector (100/120/220/240)

RM50B2
Same as RM50B loaded with Blackface, & Plexi Preamps
RM50P2
Same as RM50B2 with Palomino Vinyl & Grill Cloth
RM50P2
Same as RM50B2 with Black Vinyl & Palomino Grill Cloth

  
Bar
  RM20CB
Randall RM20CB Combo Amplifier
++ Click to Zoom ++

RM20CBP
Randall RM20CBP Combo Amplifier
++ Click to Zoom ++

Read what
Guitar Player Magazine
had to say about the RM20 (PDF - 369k)

Small but mighty! Continuing to build on the success of the highly flexible MTS Tube Series, Randall introduces the RM20 modular tube combo. Built specifically for the professional gigging and recording musician, this EL84 powered combo performs equally well on stage or in the studio.

Featuring a single modular channel with a footswitchable tube boost, the RM20 can take a lower to mid-gain module from pristine clean to sustaining lead tone at the click of a switch by simply activating the included tube boost function. Use the tube boost gain control to add a desired amount of additional saturation then adjust the boost level control for the desired boost volume.

For all modules, especially the higher gain tones, the tube boost function can be used as a volume boost without adding additional saturation by simply rolling out the boost gain and adjusting the amount of boost volume.

For studio use the RM20 features the XLR “Mic Eliminator” direct output circuit as well as a speaker on/off “Standby” switch for silent recording to lay down real authentic tube guitar tracks without disturbing the neighbors.

This combo can be ordered with any combination of 13 tube preamp modules, providing an extremely wide-range of vintage to modern tube amp tones.

  • Single modular channel
  • 15 watts
  • Ruby EL84 power tubes
  • 12” Celestion® GreenbackTM speaker
  • Master “Density” & “Presence” controls
  • Footswitchable Tube Boost function
  • “Boost Gain” control for desired distortion
  • “Boost Level” control to adjust the boost volume
  • Dual function “Standby” switch for live and silent mode
  • Series effects loop
  • XLR “Mic Eliminator” direct output
  • 8/16 ohm ext. speaker output
  • Slave output
  • Rear panel power tube bias test points.
  • World voltage AC input selector (100/120/220/240)

RM20P
Same as RM20B with Palomino Vinyl & Grill Cloth
RM20BP
Same as RM20B with Black Vinyl & Palomino Grill Cloth

AudioFanzine 2007 Innovation Award
AudioFanzine reviewed the MTS Series
and gave it their 2007 Innovation Award

  
    Discuss and learn more about MTS on our Forum HERE  
  © Copyright 2008 U.S. Music Corp. All Rights Reserved. Visit our MySpace.