Randall MTS Series Heads

MTS Series Heads

RM100M

++ Click to Zoom ++

RM100P
Palomino

++ Click to Zoom ++

RM100BP
Black Palomino
++ Click to Zoom ++

Discuss and learn more
about MTS
on our Forum HERE

RM100
Our flagship sets the standard and will forever revolutionize how future tube heads are designed. The RM100 is both traditional & modern technology rolled into one amplifier. First you have 3 independent modular channels that can be loaded with your choice and combination of the available tube preamp modules. Load each channel with a preamp tone that fits only your needs with the ability to expand your arsenal anytime a new tone is needed. Don’t purchase an amplifier because you like just the clean or hi-gain tone. Build this amp with your clean, your rhythm, and your hi-gain tone for a complete custom set-up. With more than a dozen tube preamps always available, chances are you’ll have a hard time picking just three.

CHANGE AND BIAS YOUR OWN POWER TUBES!
Enjoy the ease of replacing your power tubes anytime you like with the very user friendly power tube bias section found on each MTS amplifier. If a tube fails, no problem, the amp will kick that tube out of the circuit and a small LED will light by the tube that fails. Simply replace the small protection fuse and tube using a small voltage meter and screwdriver to adjust each individual bias point. If you like experimenting with different tube types, the bias section allows you to pop-in and bias a new set of tubes in just a few minutes.

MIDI CHANNEL SWITCHING CAPABILITY!
Connect your RM100 to any MIDI capable effects processor and program individual effects to each channel. With the MIDI in/thru jacks simply select your channel and external effect using the included RF3 MIDI footswitch, press and hold the channel switch button on the head for 2 seconds and hit the store button of the effects processor to save the preset. The included footswitch will then select both the RM100 channel and effect you want at the same time.

Each MTS series amplifier including the RM100 head can be ordered in 3 custom cosmetic options. Order any model in full Black, Black Palomino with black vinyl and palomino cloth front or full Palomino with palomino vinyl and grill cloth. Each option provides a specific look to compliment any type of MTS tone and player.

Also available with factory preloaded modules as:
RM100M1 - Clean, Treadplate & Ultra
RM100M2 - Blackface, Plexi & XTC
RM100S2 - Blackface, Plexi & XTC

3 Modules
100 Watts
6L6 Power tubes
MIDI in/thru
Master Volume, Presence, Density controls
Parallel loop w/front panel mix control

Series loop
Rear tube bias section
Slave out
3-button MIDI footswitch included
World voltage AC input selector (100/120/220/240)

RM50HB

++ Click to Zoom ++

RM50HBP
Black Palomino

++ Click to Zoom ++

Great as a club workhorse or ultra flexible studio tool, the smaller RM50 & RM20 heads can produce any tone you need, with plenty power for any gig. The single channel RM20HB comes unloaded from the factory, where the two channel RM50HB2 comes factory loaded with Blackface & Plexi tube preamp modules, or unloaded as the RM50HB

RM50H

2 module
50 watts 6L6 tube
Black cloth front
Master volume
Master density & presence
Accutronics spring reverb
Tube buffered parallel effects loops with front panel mix control

Series effects loop
Slave output
Rear panel bias test points
Master volume input (for volume pedals)
Footswitch included
World voltage AC input selector (100/120/220/240)

RM50HB2 - factory preloaded with Blackface & Plexi preamp modules.

RM20HB
(Shown with optional R112CBG cab
w/Celestion Greenback speaker)

++ Click to Zoom ++

RM20HB

Single channel
Black cloth front
15 watts
EL84 tube
Tube boost function w/Gain and Level controls

Master volume
Master density & presence
Series effects loop
Rear panel bias test points
Includes boost footswitch
World voltage AC input selector (100/120/220/240)

Discuss and learn more about MTS
on our Forum HERE


	© Copyright 2008 U.S. Music Corp. All Rights Reserved. Visit our MySpace.